So, You Want To Be A Wood Turner, Hey
I started turning wood in the neighbors store and at High School shop class. I drifted turning for a time due to faculty, military service, family and career. My profession is structure, management, harvest and Forestry. I managed to acquire plenty of different kinds of timber and store them.
My first lathe was a seat mounted the pair of instrument and Montgomery Ward wood lathe . After using this lathe for years I realized, since turners do that there are turnings to perform and larger. Is better and larger tools.
During the next few years I began to update my equipment. My lathe was a X 42. You will find specialty tools and tier tools. There are tools for spindles tools for gear and texturing for supporting turnings or your spindles. Believe I have turning tools and continue to search for more. For are for very usage. I create them myself and will design.
There are Animal Removal, chucks with attachments and their respective jaws. There are centres and spur drives. These tools have programs that are various and you may use them all, if you are like me where you do many different unique turnings and requests are being made by customers. I constructed a vacuum chuck so the base of my bowls could turn, enhances the look by roughly 100%. You can purchase accessories, all installation with vacuum pump and the vacuum chuck. I then constructed the vacuum chuck and purchased of the parts, I saved about $250.
A buddy of mine and I’m in the process of design for hollowing vessels and making a bar. I bought them with the headstock requirements and used an insert to attach them to a lathe, when I bought the chucks for holding the turnings. In case you have dreams of lathe spend some time looking at their specifications and lathe brands, it may save money.
The expense you will incur sanding and is finish. There are a verity of sanding approaches and finishes and I have spent countless dollars trying out things; my garbage can is complete. I will let you know what works for me without getting deep into this topic.
Sanding; I will sand the end to 320 grit to 250 grit and sand down and use power sanding. Finishing compounds have a requirement in their directions, over sanding can create a surface that the end won’t adhere too.
Using great is crucial. I use water foundation grain filler to smooth the surface and then use a rub oil finish rub. Turn off the bottom and complete bottom same After the end is dry. Last step wax and buff.
To sum up it; Wood Turning, most pursuits whether they’re professions or hobbies and Fishing, Photography, Camping, Boating, appears to be a fantastic place to spend of your money. There’s on limitation your fascinating only limits you.